Solution

Control systems and signal switching

A control system is what turns a collection of equipment into a room people can use without instructions. It also decides whether anyone has to swap cables by hand.

Switching solves the problem of any source on any screen. A matrix switcher takes signals from desktop computers, laptops, cameras and wireless presentation receivers and distributes them to displays, projectors and the video wall. Without a matrix, every change of layout means physically moving a cable.

Distances in large rooms exceed what a direct cable is rated for, so signals travel over twisted pair or fibre through extenders. The transmission design is done together with the cable routes: the length, the cable type and the extender positions cannot be chosen once the routes are buried in the screed.

Control comes down to scenarios. A presentation button starts the projector, lowers the screen, dims the lights and routes audio to the right input; a shut down button darkens the room and powers off the projectors in the correct order. Scenarios are written around how the particular client works and adjusted after a trial period.

What the system consists of

  • Signal matrix switcher
  • Extenders over twisted pair and fibre
  • Control processor holding the scenario logic
  • Touch panel or wall keypad
  • Wireless presentation from laptops and phones
  • Control of lighting, blinds and screens

What the work covers

  • Design of the switching scheme and cable routes
  • Equipment selection for the distances and resolutions involved
  • Installation and cable pulling
  • Programming scenarios around the client's way of working
  • Commissioning and adjustment after trial operation
  • Training and support
Contacts

Need a system like this?

Describe the site and the task, and we will propose a system and estimate the budget. Area: control and switching.